How to add RAM, Storage and WiFi module if I have barebone fanless mini computer only?
A:
Before installing RAM for the mini computers, make sure you know clearly the RAM style the mini computer required. You can use the link: http://ark.intel.com/ to search CPU details and learn the mini computer's RAM style(DDR3, DDR3L, LPDDR3), you can find the memory types it supports directly as this picture shown:
Difference of DDR3, DDR3L and LPDDR3. Laptop memory is 204pin(SO-DIMM DDR3) and desktop memory is 240 pin(DDR3).
Here is summarization of the key differences
Then pls install Storage and WiFi module step by step the following picture guide, it is suitable for Eglobal fanless mini computer serial, exactly pls check your barebone computer.
1) The mini computer support 2 storage: 1pc 2.5" HDD and 1pc Msata SSD together.
Step 1, open the mini itx alloy case, find the SATA and mSATA port on the computer motherboard as below:
Step 2. Add 2.5 inch SATA HDD or SSD and its power cable
Step 3. Input mSATA SSD, use one screw to fix it (one 1)
Step 4. Plug the WiFi module into Mini PCI-E slot, use the screw inside the bag to fix it.
After fix the antenna, external antennas just fix to the screws, like picture here:
Step 5. Use 4 screws to fix the 2.5 inch SATA HDD or SSD onto the computer bottom case, and then fix the mini computer ally case, now its over and you will find SATA and mSATA placed as shows in below picture:
